DSC

The following are instructions for the models listed below:

DSC PC1616, 1832, 1864, 1555, 632, 832, 432, 5010, 5020

To Change the Time

1. On your keypad press *6, then (Master Code) 1

You keypad will beep 3 times and the display will either flash program or will show the programming icon

2. Enter the time and date in the following way: if it was 7:35PM and the date was May 24^th 2009: you would enter (1935 05 24 09) note time is 24 hour format

3. Press # # to exit programming and the correct time should appear within a few seconds.

To Change Your Master Code

1. On your keypad press *5, then your personal 4 digit Master Code. Your keypad will beep 3 times

2. Enter the master code user number 40. After you enter the user number, the keypad will beep 3 times.

3. Enter your new desired 4-digit code, your keypad will beep 3 times.

4. Press # # to exit programming.

Back to Security System Products